Brass Quick Connect Fitting Elbow 1/4" Tube x 1/8-27 NPT Thread with Single Filter & Orifice Slip Fit 1/4" Outside Diameter Tube
Filtered Orifice Fittings and Connectors come in many forms. They almost always include a stainless wire mesh filter and ruby or sapphire orifice depending on type. Because of the wide range of possibilities designers can eliminate redundant fittings by combining the orifice and filter into one fitting. RB31301 (82748) is a brass quick connect fitting for 1/8-27 NPT thread x 0.250" diameter tubing. This fitting has a single stainless steel wire mesh filter, cup shaped to maximize surface area.
Filtered Orifice Fittings and Connectors come in many forms. They almost always include a stainless wire mesh filter and ruby or sapphire orifice depending on type. Because of the wide range of possibilities designers can eliminate redundant fittings by combining the orifice and filter into one fitting. RB31301 (82748) is a brass quick connect fitting for 1/8-27 NPT thread x 0.250" diameter tubing. This fitting has a single stainless steel wire mesh filter, cup shaped to maximize surface area.
Unit of Measure
Specifications
Brands |
N/A Bird Precision |
Suggested Pressures |
N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi) |
Series |
N/A RB31301 |
Orifice Inner Diameter (I.D.) |
N/A 0.0035 in |
Tube Size |
N/A 1/4 in |
Tube Diameter |
N/A 0.250 in |
Thread Size |
N/A 1/8-27 |
Thread Type |
N/A National Pipe Thread (NPT) |
Orifice Outer Diameter (O.D.) |
N/A 0.060 in |
Material |
N/A Brass |
Orifice Style |
N/A Sharp Edge Ruby Style |
Product Style |
N/A Filter Orifice Fitting and Connectors |
Product Type |
N/A Filter |
Additional Information
Additional Information |
N/A
This product comes with our complete range of sharp edge ruby orifices in sizes 0.0004" thru 0.035". Filtration sizes are 5, 25 and 43 microns. Order under part RB82748. Also available in straight form instead of elbow. Brass Quick Connect Fitting Elbow 1/4" Tube x 1/8-27 NPT Thread with Single Filter & Orifice Slip Fit 1/4" Outside Diameter Tube. With a Ruby Straight-Hole Orifice This Sharp Edge Ruby Orifice series is laser drilled and wire lapped to insure Roundness, surface finish and sharp edges. This orifice series is a good choice where the designer requires low flow, accuracy and repeatability. This orifice series has a complete micron series starting at 7.5 microns. |