PVDF Press-In Insert 0.204" Diameter x 0.250" Long

Press-In Inserts are easy to install into a variety of applications. Typically these inserts have a small lead designed to facilitate insertion. This insures alignment of the cartridge before driving it home.
Request Information
Unit of Measure
Items
Image

RB31057 Series 0.0020 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Kynar® (Plastic) Precision Orifice Press-In Insert
Image

RB31057 Series 0.0025 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Kynar® (Plastic) Precision Orifice Press-In Insert
Image

RB31057 Series 0.0030 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Kynar® (Plastic) Precision Orifice Press-In Insert
Image

RB31057 Series 0.0035 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Kynar® (Plastic) Precision Orifice Press-In Insert
Image

RB31057 Series 0.0040 Inch (in) Inner Diameter (I.D.) and 0.087 Inch (in) Outer Diameter (O.D.) Kynar® (Plastic) Precision Orifice Press-In Insert
Description N/A PVDF Press-In Insert 0.204" Diameter x 0.250" Long

Press-In Inserts are easy to install into a variety of applications. Typically these inserts have a small lead designed to facilitate insertion. This insures alignment of the cartridge before driving it home.
Brands N/A Bird Precision
Suggested Pressures N/A 0.060 O.D. - Low Pressure (Under 150 psi) 0.118 O.D. - Medium Pressure (5000 psi or lower) 0.087 O.D. - High Pressure (Above 5000 psi)
Series N/A RB31057
Orifice Inner Diameter (I.D.) N/A 0.0020 in N/A 0.0025 in N/A 0.0030 in N/A 0.0035 in N/A 0.0040 in
Diameter N/A 0.204 in
Press-In Insert Length N/A 0.250 in
Orifice Outer Diameter (O.D.)
N/A 0.0870 in
Material N/A Polyvinylidene Fluoride (PVDF) (Plastic)
Orifice Style N/A Sapphire Conical Vee-Hole
Product Style N/A Press-In
Product Type N/A Precision Orifice Insert
Additional Information N/A Ask the Bird staff for insertion tolerances and other insertion aids.

RB82000 is 0.204" diameter x 0.250" long PVDF material. This insert is available with either our conical 0.087" diameter sapphire orifice series.

With a Sapphire Vee-Hole Orifice (0.087" O.D.)

This Conical Vee Entry Orifice series is also wire lapped to insure uniformity of the holes roundness, surface finish and sharp edges.

This orifice series is usually a good choice for applications that require both low flow and or higher pressures. Sizes range from 0.002" up thru 0.033".